Stator Honda CBR1000RR (04-07)
Double click on above image to view full picture
Electrosport Quality Guarantee:
All products we sell come with an industry-leading 1 Year Warranty, so you can buy with confidence.
All products we sell come with an industry-leading 1 Year Warranty, so you can buy with confidence.
Description
Vehicles This Product Is Known To Fit:
If You Like This You Might Also Like:
ESG957 is a high quality stator that replaces the not-so-reliable OEM stator on Honda CBR1000RR from 2004 to 2007.
Our ESG957 is built on a modern stator core and only the highest grade copper wire is used for the windings. All windings are installed using modern computer controlled winding equipment to ensure the highest possible quality and perfect winding tightness.
ElectroSport then installs high quality lead wires that offer very chafe and temperature resistant insulation, the best quality rubber seals, insulation coatings and connectors to make this ESG957 a plug in replacement stator.
The ultra high magnetic conductivity of the core material coupled with the low resistance in the reconfigured winding results in the very high efficiency that this stator offers. It also means that this stator runs very cool which drastically improves reliability. The winding configuration has been specially developed for this model to keep the temperature down and still allow for a perfect output across the wide RPM range.
Our ESG957 stator offers superior performance and reliability compared to the OEM stator.
Like all stators manufactured by ElectroSport this ESG957 also comes with a full one year warranty.
Note: The OEM flywheels on the 1000RR use magnets that are (much) too powerful and these cause the OEM stators to overheat and fail. Check with your Honda dealer as there is a recall on the flywheel on some of these models. The OEM Honda stator produces about 350W @ 3500RPM, we scaled the output of our ESG957 down to 320W to drastically increase reliability. There is no problem with the lowered output as the bike does not need more than about 250W.
Our ESG957 is built on a modern stator core and only the highest grade copper wire is used for the windings. All windings are installed using modern computer controlled winding equipment to ensure the highest possible quality and perfect winding tightness.
ElectroSport then installs high quality lead wires that offer very chafe and temperature resistant insulation, the best quality rubber seals, insulation coatings and connectors to make this ESG957 a plug in replacement stator.
The ultra high magnetic conductivity of the core material coupled with the low resistance in the reconfigured winding results in the very high efficiency that this stator offers. It also means that this stator runs very cool which drastically improves reliability. The winding configuration has been specially developed for this model to keep the temperature down and still allow for a perfect output across the wide RPM range.
Our ESG957 stator offers superior performance and reliability compared to the OEM stator.
Like all stators manufactured by ElectroSport this ESG957 also comes with a full one year warranty.
Note: The OEM flywheels on the 1000RR use magnets that are (much) too powerful and these cause the OEM stators to overheat and fail. Check with your Honda dealer as there is a recall on the flywheel on some of these models. The OEM Honda stator produces about 350W @ 3500RPM, we scaled the output of our ESG957 down to 320W to drastically increase reliability. There is no problem with the lowered output as the bike does not need more than about 250W.